Connect-EZ: Helical Anchor-Wall Brace Connector System
Designed to eliminate the troublesome need to remove the shoe on temporary wall braces when connecting to helical ground anchors, the CONNECT-EZ® Helical Anchor-Wall Brace Connector (H-B) makes the connection safely and efficiently. Due to long term exposure to weather and job site conditions, brace shoes can be difficult to remove from the wall brace and once removed are frequently lost. The H-B provides a simple solution to this costly problem and affords a greater degree of flexibility when aligning the connection of the brace and helical anchor. Tested to 23,000 lbs. ultimate tensile capacity and subjected to more than 250,000 load cycles, the H-B provides a safe, efficient, cost effective solution to the challenges of making the helical-anchor to wall brace connection
Eliminates brace show removal and lost shoes
Flexible connection alignment
Tested to 23,000 lbs. ultimate tensile load
Lab tested to more than 1,000,000 cycles
Safe working load 9,000 lbs.
Aligns brace with helical shaft
Reduces tension load on bolt by half
Note: The CONNECT-EZ® “H-B” pictured here are fabricated to accommodate the Dayton Superior T-14 brace shoe. The “H-B” can readily be custom designed and fabricated to accommodate other brace shoe configurations.